Too much dryer lint

Lint can be a real problem with dryers because it restricts the air flow inside the dryer drum during the drying cycle.  Air flow in the drum during the drying cycle is very important because the moisture from the wet clothes needs to be flushed out.  The air flow also needs to cool the heater element to prevent overheating and damage. The clothes will take longer to dry and also can cause damage to thermostats, heaters, and electronics.

This picture shows lint buildup around the heater element and the thermostats.  This lint buildup suggests there may be a vent restriction.  Air back-pressure causes this lint to flow inwards and into the interior of the dryer.

Dryer vents should be professionally cleaned at regular intervals to maintain proper dryer operation and to avoid costly repairs.  Western Appliance can recommend a good company to have this service performed.  For any questions feel free to call Rich at 208-344-4893 or visit our website at https://appliancerepairboise.com

Thank you

Rich

GE Dishwasher - Poor Washing

GE's latest dishwasher design is a very popular and dependable appliance.  As with most appliances they can and will have minor and major functionality problems.  In this case the dishwasher was not filling the tub with enough water to ensure  proper functionality. Problems like this can be a great inconvenience to our Boise homeowners.  When appliances break down, nobody is happy.
When I arrived I ran a diagnostic routine on the appliance and found that indeed, the tub was not filling completely with water - at least to it's specified level.  It would fill with water for about 10 seconds, stop, then fill again for a couple more seconds.  Then, instead of the hearing the wash motor turning on, I would hear a clicking sound - repeatedly.  It appeared the sound was coming from under the toe-kick area of the appliance.  This is where the main control board is located.  Although a problem like this should be verified by doing voltage checks at the control board connector this "clicking" sound is a tell-tale sign of a possible malfunction with control board.  A  faulty control board was verified by looking at a "switching" voltage at the water control valve and an absence of a control voltage at the dishwasher wash motor.
Well, long story short, I arrived today, installed a brand new control board, and the now the dishwasher functions great!  Boise Appliance Service 208-344-4893