dryer repair

A small component like this can be trouble when it goes bad.  This bad door switch can and will stop your dryer from turning ON and drying your clothes.  We carry these parts on our Boise service trucks so we can fix this dryer quickly.

Slide-In Whirlpool Oven Repair

Our techs at Western Appliance Repair in Boise completed an interesting service call today for a Whirlpool Oven.

These pictures show what disassembly is necessary to replace a bad cooling fan motor in a slide-in oven.  The disassembly is quite severe to say the least.  This is not a problem for us however.  We can tackle a job like this one with ease.

When we arrived on site we ran a diagnostics program to confirm the blower was indeed not working.  The blower was inoperable and when we actuated the control relays remotely we received no response.  This suggests we may have a bad motor or, as we’ve seen in the past, a bad control board.  In some cases the blower motor AND the main control board will need to be replaced due to compatibility issues.  In this particular case however, the cooling fan was the only thing that was replaced.

After repair was completed and new fan installed, we ran a diagnostic program to verify proper fan operation.  Our nice customer informed is that the oven has been working perfectly with no more error messages.

A job well done!

https://www.westernappliancerepairboise.com

Dryer Repair - Thermostat Operation

Hello, it’s Rich again from Western Appliance.  We did six more repairs today.  It seems that appliances never stop breaking.

In this picture we see two different components.  One is a dryer high limit thermostat and the other is a thermal fuse. These important components regulate the dryer element’s heat – which is used for heating the interior of the drum when you dry clothes.  They do not regulate the temperature inside the dryer drum however.  I hope I did not confuse you. The only thing these components do is regulate the dryer element heat alone, that’s it.  The dryer uses separate components which regulate the internal drying temperature.  I’ll try to explain this a better way – if you wanted to start a campfire with a match you would want that match to burn at a sufficient temperature to light a fire.  Once the fire is started then you can regulate the fire with the addition of wood or reducing the fires oxygen.  Well, these thermostats regulate the “match”.  The heat inside the dryer is controlled by a separate thermostat or temperature sensor.

They are mounted to the electric heating element housing and prevent overheating.  It is very common to find these on most every dryer we encounter in Boise and Meridian.

Western Appliance Repair in Boise Idaho

Too much dryer lint

Lint can be a real problem with dryers because it restricts the air flow inside the dryer drum during the drying cycle.  Air flow in the drum during the drying cycle is very important because the moisture from the wet clothes needs to be flushed out.  The air flow also needs to cool the heater element to prevent overheating and damage. The clothes will take longer to dry and also can cause damage to thermostats, heaters, and electronics.

This picture shows lint buildup around the heater element and the thermostats.  This lint buildup suggests there may be a vent restriction.  Air back-pressure causes this lint to flow inwards and into the interior of the dryer.

Dryer vents should be professionally cleaned at regular intervals to maintain proper dryer operation and to avoid costly repairs.  Western Appliance can recommend a good company to have this service performed.  For any questions feel free to call Rich at 208-344-4893 or visit our website at https://appliancerepairboise.com

Thank you

Rich

GE Dishwasher - Poor Washing

GE's latest dishwasher design is a very popular and dependable appliance.  As with most appliances they can and will have minor and major functionality problems.  In this case the dishwasher was not filling the tub with enough water to ensure  proper functionality. Problems like this can be a great inconvenience to our Boise homeowners.  When appliances break down, nobody is happy.
When I arrived I ran a diagnostic routine on the appliance and found that indeed, the tub was not filling completely with water - at least to it's specified level.  It would fill with water for about 10 seconds, stop, then fill again for a couple more seconds.  Then, instead of the hearing the wash motor turning on, I would hear a clicking sound - repeatedly.  It appeared the sound was coming from under the toe-kick area of the appliance.  This is where the main control board is located.  Although a problem like this should be verified by doing voltage checks at the control board connector this "clicking" sound is a tell-tale sign of a possible malfunction with control board.  A  faulty control board was verified by looking at a "switching" voltage at the water control valve and an absence of a control voltage at the dishwasher wash motor.
Well, long story short, I arrived today, installed a brand new control board, and the now the dishwasher functions great!  Boise Appliance Service 208-344-4893

Proper Washer Loading

Many times while loading clothes into front-loading washing machines we overlook some simple yet effective preventative actions that can prevent a appliance repair visit.
I receive many repair calls from Boise homeowners who describe a rip or chunk that has been taken out of their washer door seal.  Most times the rip is in the six o’clock position. Most never realize what causes this.  I’ve heard things such as their little fluffy dog had bitten a piece out of it or their toddler bit a piece out of it.  Ha Ha.
No, what actually causes this rip in the washer seal is improper loading of the clothes.  When the clothes are not pushed to the back of the drum far enough before the door is closed it sets up the perfect conditions for seal to rip.  If the clothing is hanging out just a small amount when the door is closed, it pinches the clothing between the seal and the inner door.  When the drum goes into the spin mode, it will rip a chunk right out of the seal in the six o’clock position.
Unfortunately, this can happen after a new seal has been installed.  I always warn my customers of this when I run into  this type of repair.
Learn more appliance repair tips

Just when I thought spring was around the corner winter rears it's semi-ugly head, well that is unless your s skier or just love snow.  I'm right in the middle.  I love the snow but hate the delays and the dangerous driving.  I had 5 jobs I had to complete today.  A washer, dryer, dishwasher, oven, and refrigerator repair.  What an assortment in one day!  Oh well, to start things off, it took me 1 hour to drive 6 miles on Victory Road in Meridian.  The freeway was backed up and everyone was driving extremely slow.  Most thought it was a good idea to take side streets.  Well I guess everyone had that idea by the looks of it.  Well, I guess we should count our blessings, this is a great place to live. 
Rich
Western Boise Appliance Repair
208-344-4893

Winter Refrigerator Settings for Garage

If you have a refrigerator in your garage like this one you may not get the proper freezing temperature in your freezer in the cold winter months.  In many whirlpool and kenmore refrigerators the thermostat is located in the fresh food section and will be affected by cold garage air temperature.  The cold air permeates through the refrigerator inhibiting the thermostat from turning the compressor on.  One way to lessen this problem is to adjust both the refrigerator and freezer knobs to max.   If you have any question, we can be reached at 208-344-4893, Western Appliance Repair.

Front burner won't light - gas stove

Winter is not done with us yet

This has been a tough winter for appliance repair.  This week our weather will reach into the 40's so we'll see some of this snow melt off.  I'll be so glad.

Dryer won't start - ticking sound

Evaporator Fan Operation

This  is a evaporator fan motor that is located in the freezer of a bottom-mount refrigerator at a house in Boise. 

The evaporator fan motor is responsible for circulating cold air from the freezer to the fresh food side of the refrigerator.  All the cooling necessary to cool your food is supplied by the freezer evaporator.  The freezing air is blown upwards, in French-door or bottom-mount refrigerators.  The airflow is constant in most cases. 

The cold air is regulated to keep a steady temperature by the use of a damper and damper motor.  The damper is opened and closed based on the refrigerator temperature - as detected by a thermistor or thermostat.

When these fans go bad the fresh food will warm but the food in the freezer will stay frozen.  You may also hear strange noise, rumbling, coming from the bad fan bearing. 

When this happens, call a professional who has the necessary experience to complete your repair quickly and professionally.

Western Boise Appliance Repair  208-344-4893 

Dryer with broken blower wheel.

This is a dryer blower wheel from a whirlpool appliance.  It is money on the motor shaft so when the drum turns the blower to circulate air in the drum.  

This blower was cracked right in half.  I've never seen one of these break because they are very durable.

I thought i have seen everything in Boise!!   For any appliance repair help, we can be reached at 208-344-4893

Many times the front door of the oven will need to be removed to access the internal components.  When testing we will sometimes need to check the gas valves, ignitors, ignition wires, and DSI signals.  In this instance it's good to have a reliable light source as well.  It's harder to fix something when you can't see it.  :->

Western Boise Appliance Repair 208-344-4893

Washer lid switch is broken

This lid switch bit the dust.  This is what was recovered from this Kenmore direct-drive washer.

Boise Weather is Awesome

Great day in Boise.  Not too hot and not too cold, just perfect.  I love 80's weather, probably since I grew up in th 80s.  :-)

GE dishwasher work downtown

This dishwasher was being bad.  The gasket door gasket was coming loose and was wrapping around the dish rack when it wAs being loaded.  We put in a new seal which fixed the problem.

Lg washer repair

This is a lg front load washer we are working on right now in Boise.  The drain pump would not pump the water out of the drum.  Here is Mark performing the re assembly of the front panel and bellow.  4346 rose hill St Boise I'd 83705 208-344-4893

Broken heater element

Washer enclosure removal

Some of my other posts did not show detail for the removal of washer clips.  Once these clips have been removed the washer enclosure can be pulled off.  Here is a pic that shows where to place the screwdriver in relation to clip.